Grizzly H2801 - Manual (Page 9)

H2801 4" Jointer -7-
Unpacking
The jointer and hardware (shown in Figure 2 ) are
shipped from the manufacturer in a carefully
packed carton. If you discover the machine is
damaged after you have signed for delivery, and
the truck and driver are gone, you will need to file
a freight claim with the carrier. Save the contain-
ers and all packing materials for possible inspec-
tion by the carrier or its agent. Without the pack-
ing materials, filing a freight claim can be difficult.
If you need assistance determining whether you
need to file a freight claim, or with the procedure
to file one, please contact our Customer Service.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Piece Inventory
After all the parts have been removed from the
carton, you should have:
Part Qty
• Jointer Unit 1
• Fence 1
• Push Blocks 2
• Left Trunnion 1
• Right Trunnion 1
• Cap Screws M5-.8 x 8 4
• Lock Washers 5mm 4
• Slotted Screws M5-.8 x 10 4
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedien-
cy, replacements can be obtained at your local
hardware store.
Figure 2. Model H2801 base unit and assembly
parts.