Garmin 110 User Manual

Page 75

Advertising
background image

Rino

®

110 Owner’s Manual

69

U

NIT

O

PERATION

>

S

ETUP

P

AGES

NMEA In/NMEA Out—supports the output of standard

NMEA 0183 version 3.0 data. Use this for real-time

plotting with MapSource or 3rd party programs.
Text Out—allows ASCII text output of location and

velocity information without input capabilities.
RTCM IN—allows DGPS input using a standard RTCM

SC-104 format without output capabilities.
RTCM In/NMEA Out—allows DGPS input using a

standard RTCM SC-104 format and supports the output

of standard NMEA 0183 version 3.0 data.
RTCM In/Text Out—allows DGPS input using a

standard RTCM SC-104 format and simple ASCII text

output of location and velocity information.
None—provides no interfacing capabilities.

If Garmin DGPS or RTCM In/NMEA Out format

is selected, additional fields are provided to control

a Garmin differential beacon receiver (e.g. GBR 23)

directly from your unit. Tuning is automatic with

Scan

or you can enter the beacon frequency and bit rate when

you select User from the Beacon list to manually tune the

receiver. Refer to the beacon receiver instructions.

To select a serial data format:

1. Highlight the

Serial Data Format field and then

press the

Thumb Stick In.

2. Highlight an option and then press the

Thumb

Stick In to activate it.

Interface Setup Page

Advertising
This manual is related to the following products: