GE DPSB613 - Manual (Page 3)

■ Properly ground dryer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
■ Install or store where it will not be exposed to
temperatures below freezing or exposed to
the weather.
■ Connect to a properly rated, protected and sized
power supply circuit to avoid electrical overload.
■ Remove the colored protective film from the
control panel.
■ Remove all sharp packing items and dispose of
all shipping materials properly.
Exhaust/Ducting:
Gas dryers MUST be exhausted to the outside.
Use only rigid metal 4
″ diameter ductwork
inside the dryer cabinet. Use only rigid metal
or flexible metal 4
″ diameter ductwork for
exhausting to the outside. USE OF PLASTIC OR
OTHER COMBUSTIBLE DUCTWORK CAN CAUSE A
FIRE. PUNCTURED DUCTWORK CAN CAUSE A FIRE
IF IT COLLAPSES OR BECOMES OTHERWISE
RESTRICTED IN USE OR DURING INSTALLATION.
For complete details, follow the Installation
Instructions.
2
1
3
PROPER INSTALLATION
This dryer must be properly installed and located in accordance with the Installation Instructions
before it is used. If you did not receive an Installation Instructions sheet, you can receive one by
visiting ge.com, or by calling 800.GE.CARES (800.432.2737).
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
ge.com