Gianni Industries DG-11S - Manual

GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-11 Ver. E Published on 2008.08.05
The products are manufactured under an ISO
9 0 0 1
Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Features
Statement
DG-11
Digital Keyless Entry System
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Specifications
4 digit codes
Door Reed Switch Input for Anti-Trailing
Durable Stainless Steel Faceplate
10 user PINs
Fully Programmable via keypad and master code
Non-Volatile Memory
Invalid PIN Lock-out
Optional With Luminous Keypad
Digital code-operated for indoor access control keypad with
up to 10 individual user PIN codes , suitable for small and
m e d i u m - s i z e b u s i n e s s e s , m u l t i - t e n a n t r e s i d e n t i a l a n d
commercial buildings, as well as clinics and health facilities.
The door reed switch Input is used to time out the timer
when door is moved for Anti-Trailing. User access PINs
ensure that all functions controlled to authorized persons only.
It mounts to
lectrical box or
directly to any wall.
Common Europe single-gang e
Operating Voltage: 9~14 Vdc
Current Draw: Average 30mA, Peak 80mA @ 12Vdc
Input: One request-to-exit, and time out reed switch contact
Relays: N.O./N.C./Com. Output (free voltage contact), 3A@
125Vac or 30Vdc
Operating Temperature:-20~+70C
Ambient Humidity:0~95% relative humidity non-condensing
Visual Signals:
Green: Power on
Red: Relay activated
Yellow: Program Mode Lock-out
Factory Master Code: 1234
Invalid PIN Lockout: System will shut down 60 seconds while
6 times of incorrectly password attempted.
Relay Activation Time:(*20)
Pulse mode: 1~99 seconds(01~99)
Latching mode (00)
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
User PINs: (*01~*10)It is possible to program 10 different
User PIN codes.
(Flush Mount Installation)
1
4
7
2
5
8
0
3
6
9
Unit: mm Unit: mm
88
88 36
1
4
7
2
5
8
0
3
6
9
British standard
( ) electrical box excluded
DG-11
DG-11
DG-11S
DG-11S
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw