GE JKP17 - Manual (Page 35)

b e
The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the
temperature probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
Oven Light Replacement
CAUTION: Before replacing your oven light bulb,
disconnect the electrical power for your oven at
the main fuse or circuit breaker panel or pull the
plug. Be sure to let the light cover and bulb cool
completely before removing or replacing them. When
in use, light bulbs can become warm enough to break
if touched with a moist cloth or towel. When cleaning,
avoid touching warm lights with cleaning cloths if the
light cover is removed.
The oven light is covered with a glass removable
cover which is held in place with a wire. Remove the
oven door, desired, to reach the cover easily.
remove:
your hand under the cover so it doesn’t fall
when released. With fingers of the same hand, firmly
push back the wire until it clears the cover. Lift off
the cover.
DO NOT REMOVE ANY SCREWS.
Replace bulb with 40-watt home appliance bulb.
To replace cover:
Place it into the groove of the light receptacle. Pull the
wire forward to the center of cover until it snaps in
place. When in place, the wire holds the cover firmly.
Be certain the wire is in the depression in the center of
the cover.
Connect the electrical power to the oven.
35