LG C TM-510 - Manual (Page 22)

30 31
need to add the area code to an existing phone
book number. When a phone book entry or
message callback number shows up on the
display, you can make addition to the beginning
of the original number. However, you cannot edit
the original number during “Prepending”.
1) Recall a number in memory.
2) Enter the appropriate digits to prepend numbers
and the phone number.
3) Press .
3) Select one out of the following:
Press [Hard Pause].
Press [Time Pause].
4) Enter additional number(s) (e.g. pin number or
credit card number).
5) Press Soft Key 1 Opt and press Soft Key 1 Sel , the
sub-menu will appear and select “Save” on the sub-
menu, to save this number with pauses.
6) The phone will ask you for the memory location
where the number will be saved. Press Soft Key 1
Next to automatically store the number in the first
available memory location. You also have the option
to enter a specific three-digit memory location
number.
(Entry 9 is designated to emergency call)
7)Select your desired label types(Home, Office, Mobile,
Pager, Data / Fax) using .
8) Enter a name (up to 16 characters) and then press
Soft Key 1 Save . If you do not want to enter a
name, press Soft Key 1 Save to proceed directly to
the next number.
9) You may select the desired ID ring type, secret, and
voice recognition option using .
10) Press Soft Key 1 Save when you are done.
3. “Prepending” a Stored Number : “Prepend” can
be used if you are out of your home system and