Garmin 190-01098-00 - Manual (Page 19)

VHF 300 Series Owner’s Manual 3
Basic Operation
Entering Your ATIS Identification Number
IMPORTANT: Use caution when entering your ATIS identification number because you
can only enter it once. If you need to change your ATIS identification number after entering
it, you must take the radio to your Garmin dealer for reprogramming.
1. Press the MENU key.
2. Select ATIS > MY ATIS ID .
3. For each number in the sequence, turn the Channel knob clockwise to increase the
number, and counterclockwise to decrease the number.
4. Press the Channel knob to accept the number and move to the next number in the
sequence.
5. Select ACCEPT when you have entered your ATIS number. The radio prompts you
reenter your number.
6. Enter your ATIS ID number again, and press ACCEPT . If the ATIS ID numbers you
entered do not match, the screen displays “ATIS ID NUMBERS DO NOT MATCH”.
Select RETRY and enter the numbers again.
Viewing Your ATIS ID Number
1. Press the MENU key.
2. Select ATIS > MY ATIS ID .
3. Select OK to return to the previous screen, or press the MENU key to return to the Home
screen.
Turning ATIS Functionality On and Off
1. Press the MENU key.
2. Select ATIS > ATIS .
3. Select ON or OFF . When ATIS is enabled, the ATIS icon is displayed on the screen.
4. Select OK to save your changes and return to the Home screen. Press the MENU key to
return to the Home screen without saving your changes.