GPX TDE2480 - Manual (Page 9)

Customer Support: 1-888-999-4215 GPX 9
Television Setup
Requires a TV antenna (not included).
1. Connect a VHF, UHF, or HDTV antenna to the
RF INPUT on the television.
The Auto Channel Scan must be run before any
channels can be viewed on the television.
2. Press the SOURCE button and switch to TV
mode.
3. Press the MENU button.
4. Use the ARROW buttons to select Channel in
the on-screen menu. Press the ENTER button.
5. Use the ARROW buttons to select Signal Type
in the on-screen menu. Press the ARROW
buttons to change the Signal Type to Air.
6. Use the ARROW buttons to select Auto
Channel Search in the on-screen menu. Press
the ENTER button to automatically scan for
available channels.
Connecting a TV Antenna Connecting a Set-Top Box
Requires a cable connection.
1. Connect a cable to the RF INPUT on the
television.
The Auto Channel Scan must be run before any
channels can be viewed on the television.
2. Press the SOURCE button and switch to TV
mode.
3. Press the MENU button.
4. Use the ARROW buttons to select Channel in
the on-screen menu. Press the ENTER button.
5. Use the ARROW buttons to select Signal Type
in the on-screen menu. Press the ARROW
buttons to change the Signal Type to Cable.
6. Use the ARROW buttons to select Auto
Channel Search in the on-screen menu. Press
the ENTER button to automatically scan for
available channels.
The Auto Channel Scan must be run before any
channels can be viewed on the television.
1. Press the SOURCE button and switch to TV
mode.
2. Press the MENU button.
3. Use the ARROW buttons to select CHANNEL
in the on-screen menu. Press the ENTER
button.
4. Use the ARROW buttons to select Auto
Channel Search in the on-screen menu. Press
the ENTER button to automatically scan for
available channels.
Connecting Basic Cable
Auto Scanning for Channels
Requires a Set-Top Box (not included).
If your Set-Top Box has an HDMI Output:
• Connect the HDMI output on the Set-Top Box
to the HDMI INPUT on the television using
an HDMI cable (not included).
If your Set-Top Box has a Composite Video
Output:
• Connect the video output on the Set-Top
Box to the COMPOSITE VIDEO INPUT on
the television using an A/V RCA cable (not
included). Connect the audio output on the
Set-Top Box to the RCA STEREO AUDIO
INPUT on the television.
If your Set-Top Box has a Component Video
Output:
• Connect the component video output on
the Set-Top Box to the COMPONENT VIDEO
INPUTS on the television using a component
RCA cable (not included). Connect the
audio output on the Set-Top Box to the RCA
STEREO AUDIO INPUT on the television.
After connecting your Set-Top Box:
• Press the SOURCE button to switch between
TV, AV 1 or 2, YPbPr 1 or 2, HDMI 1 or 2, and
VGA to match the connection used.