Gillette 5730 - Manual (Page 13)

12
Maximum battery capacity will only be reached after
several charging/discharging cycles.
5-minute quick charge is sufficient for a shave.
Shaving
First, remove the trimming attachment (7): Using your
thumbs, press against the side clips of the trimming
attachment so that they swing off in the direction of the
arrows (a). Activate the on/off switch (6). The floating foil
frame automatically adapts to your skin surface for a close,
smooth shave.
For best results:
Always shave before washing your face.
At all times, hold the shaver at right angles (90°) to the
skin (b).
Stretch the skin and shave against the direction of beard
growth.
For pre-shaving after a few days of not having shaved, use
the wide shaper (4a) to pre-cut long hairs. For a close,
smooth shave, finish with the foil.
To maintain 100% shaving performance, replace your foil
and cutter block at least every 18 months or when worn.
This appliance is suitable for use in a bath or shower.
When using it in the shower, we recommend
applying shaving foam or gel.
Using the rotating styler
The wide shaper (4a) evenly cuts and trims large areas (c). It
is ideal for shaping sideburns, moustaches and partial short
beards. The wide shaper is provided with safety rips and a
gliding strip for less irritation and easy gliding. Press the blue
stripes to push up the rotating styler (4).
While stretching the skin, guide the wide shaper against the
direction of hair growth.
The narrow shaper (4b) precisely defines lines and edges (d),
being ideal for precise contouring.
To use the narrow shaper, push up the styler and turn it 180°.
Frequent use of the styler will reduce the battery capacity.
Using the trimming attachment
The trimming attachment (7) is ideal for beard trimming
and keeping it at a constant length.
•
•
•
•
•
•
•
•
5730354_Cruzer_2838_Z60_China.in12 12 5730354_Cruzer_2838_Z60_China.in12 12 11.04.2007 13:55:16 Uhr 11.04.2007 13:55:16 Uhr