Mounting on your dashboard, Removing the device, cradle, and mount, Removing the device, cradle – Garmin ASUS A10 User Manual

Page 121: And mount

Advertising
background image

Appendix

Garmin-Asus A10 Owner’s Manual

113

If you need to replace the battery in

the device, use an SBP-23 lithium-

ion battery. For more information on

purchasing a replacement battery, go to

www.garminasus.com

.

Mounting on Your

Dashboard

Notice

The permanent mounting adhesive is

extremely difficult to remove after it is

installed.
A mounting disk is included in some

device packages. Use the mounting

disk to mount your device to the

dashboard and comply with certain

state and local regulations.
1. Clean and dry the dashboard where

you are placing the disk.

2. Remove the backing from the

adhesive on the bottom of the disk.

3. Place the disk on the dashboard.

4. Remove the clear plastic cover

from the top of the disk.

5. Place the suction cup mount on top

of the disk.

6. Flip the lever down (toward the

disk).

Removing the Device,

Cradle, and Mount

Removing the device from the

Cradle

1. Press up on the tab on the top of the

cradle.

2. Tilt the device forward.
Removing the Cradle from the

Mount

1. Turn the cradle to the right or left.
2. Apply pressure until the socket on

the cradle releases the ball on the

mount.

Advertising