Gemini GSS-1522 - Manual (Page 3)

(3)
INTRODUCTION:
Congratulations on your purchase of a GSS-SERIES speaker, engineered
& manufactured by Gemini Sound Products. This state of the art
speaker is backed up by a three-year warranty.
FEATURES:
All GSS Speakers Have the Following:
• Push Button Connectors • Metal Corners/Full Metal Grill • Large Carrying Handles
GSS-18 SUB:
• Passive 18" Subwoofer System • 300 Watt RMS
• Rubber Feet • 35mm Stand Mount
• Speakon TM Input Jacks • 8 Ohms Impedance
GSS-1522:
• 15" Woofer with High Temp Voice Coil • 12" x 4" horn & two 3" tweeters
• 160 Watt RMS • 8 Ohms Impedance
• 1/4 Input Jack
CAUTIONS:
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit. There are,
NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a
qualified Gemini Sound Products service technician.
In the USA: If you experience problems with this unit, please call 1 (732) 738-9003 for
Gemini Customer Service. Do not attempt to return this equipment to your dealer.
3. Do not expose this unit to direct sunlight or to a heat source such as a
radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or
other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton
and packaging. This will reduce the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY
CONTROLS OR SWITCHES.
CONNECTIONS:
PLEASE NOTE IT IS VERY IMPORTANT THAT YOUR AMPLIFIER HAS
MATCHED POWER RATINGS!
Make sure your equipment is completely OFF and also lower ALL
VOLUME, LEVEL, & GAIN controls and before connecting the speaker.
1. Use a 1/4" SPEAKER or SPEAKON TM CABLE (1) from your AMPLIFIER
LINE OUTPUT (2) to connect to your speakers 1/4" AMPLIFIER INPUT
JACK (3) or SPEAKON
TM CABLE INPUT (3).
2. Another way to connect your AMPLIFIER to your speaker is the
TERMINAL CUP (4). Use the PUSH-BUTTON CONNECTORS (5) to
connect the POSITIVE (-) and NEGATIVE (-) ends of a standard
SPEAKER WIRE (6) with a 12-GAUGE minimum thickness from your
AMPLIFIER LINE OUTPUT (2) to your speakers TERMINAL CUP (4).
3. You can also use the additional 1/4” AUXILIARY or SPEAKON TM
OUTPUT JACK (7) to CHAIN-LINK an additional speaker using an
additional 1/4" SPEAKER CABLE (8).
OPERATION:
The speakers can be used in pairs for a NORMAL setup, or in groups of
four when CHAIN-LINKED together.
NORMAL SETUP:
1. Now turn on your MIXER or other signal source.
2. Then turn on your AMPLIFIER and increase the VOLUME or GAIN control
as recommended by the AMPLIFIERS owner manual.
3. Start playing from your TURNTABLE, CD PLAYER, MIC, etc. and adjust
the volume controls from your mixer to a reasonable level.
CHAIN-LINK:
Only 1 additional speaker can be added to each speaker in a CHAIN-
LINK setup. Connect your speakers first then follow the steps for a
NORMAL setup, your AMPLIFIER should compensate for the extra speakers.
SHOULD YOU EXPERIENCE ANY DIFFICULTIES OR PROBLEMS,
PLEASE CALL: 1 (732) 738-9003 FOR GEMINI CUSTOMER SERVICE.
SPECIFICATIONS:
GSS-SUB:
Amplifier’s Output Power:..............................................................................................300 Wrms
Frequency response:………….......................................................................................30Hz-2kHz
Impedance...........................................................................................................................8 Ohms
Components:….…………...............................................................…...…………….18" Subwoofer
Dimensions:……….……........................................W 21.5 x D11.25 x H25.4 (546x 740 x 646mm)
Features:..........................Speakon
TM Input Jacks, Carrying handles, Push button connectors,
....................................................................Rubber feet, Metal Corners/Full metal grill
Weight:……………………...........................……………..............................................77 lbs (35 kg)
GSS-1522:
Amplifier’s Output Power:..............................................................................................160 Wrms
Frequency response:…………............................…...................................….......…….32Hz-20kHz
Impedance:.........................................................................................................................8 Ohms
Components:….…………........................................15" Woofer 12" x 4" horn & two 3" tweeters
Dimensions:……….……...............................W 24.5” x D 20.25” x H 33.5” (622 x 515 x 851 mm)
Features:...................1/4” TRS Jacks, Push button connectors, Metal Corners/Full metal grill
Weight:……………………...........................……………….......................................63 lbs (28.6 kg)
SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT
NOTICE FOR PURPOSE OF IMPROVEMENT.