English, 6 pc health status, Reset case open status – GIGABYTE GA-K8N51GMF-9-RH User Manual
Page 42: Case opened, System/cpu temperature, System/cpu fan speed (rpm), Cpu warning temp, System/cpu fan stop warning, Cpu smart fan control
GA-K8N51GMF-9-RH Motherboard
- 42 -
English
2-6
PC Health Status
Reset Case Open Status
Disabled
Don't reset case open status. (Default value)
Enabled
Clear case open status at next boot.
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) VCORE / DDR Power / +3.3V / +12V
Detect system's voltage status automatically.
System/CPU Temperature
Detect system/CPU temperature automatically.
System/CPU FAN Speed (RPM)
Detect system/CPU fan speed status automatically.
CPU Warning Temp.
60
o
C / 140
o
F
Monitor CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F
Monitor CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F
Monitor CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F
Monitor CPU temperature at 90
o
C / 194
o
F.
Disabled
Disable this function. (Default value)
System/CPU FAN Stop Warning
Disabled
Disable System/CPU fan stop warning function. (Default value)
Enabled
Enable System/CPU fan stop warning function.
CPU Smart FAN Control
(Note)
Disabled
Disable this function. (Default value)
Enabled
When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
PC Health Status
Reset Case Open Status
[Disabled]
Case Opened
Yes
VCORE
OK
DDR Power
OK
+3.3V
OK
+12V
OK
System Temperature
32
o
C/89
o
F
CPU Temperature
45
o
C/113
o
F
System FAN Speed
3245 RPM
CPU FAN Speed
3245 RPM
CPU Warning Temp.
[Disabled]
System FAN Stop Warning
[Disabled]
CPU FAN Stop Warning
[Disabled]
CPU Smart FAN Control
[Disabled]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level `
[Disabled]
Don’t reset case
open status
[Enabled]
Clear case open status
and set to be Disabled
at next boot
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
For more detailed information please check at the FAQ section on GIGABYTE's website.