Genie GL-12 - Manual (Page 14)

12 Genie Lift Part No. 35566
Operator's Manual First Edition • Sixth Printing
Test the Brake Operation
(if equipped)
1 Press down on the foot pedal to lock the brake.
2 Push the machine.
Result: The wheels should not roll.
3 Pull up on the foot pedal to release the brake.
4 Push the machine.
Result: The machine should move.
Test the Winch Operation
Note: The Genie Lift 4 does not have an inner
frame.
1 Rotate the winch handle clockwise to raise the
carriage.
Result: The carriage should raise to the top of
the inner frame and then the inner frame should
raise. The carriage and inner frame should
move smoothly, free of hesitation and binding.
2 Rotate the winch handle counterclockwise to
lower the carriage.
Result: The inner frame should lower into the
outer frame, and then the carriage should lower
into the inner frame. The carriage and inner
frame should move smoothly, free of hesitation
and binding.
Note: If the carriage and inner frame do not move
freely, the channels may need to be lubricated with
a dry silicone spray or silicone wax.
Test Electric Winch Operation
(if equipped)
Note: The Genie Lift 4 does not have an inner
frame.
1 Connect the battery pack.
2 Pull out the red Emergency Stop button to the
on position.
3 Push the up button on the hand controls.
Result: The carriage should raise to the top of
the inner frame and then the inner frame should
raise. The carriage and inner frame should
move smoothly, free of hesitation and binding.
The winch should turn off when the carriage
reaches maximum height.
4 Push in the red Emergency Stop button to the
off position.
5 Push the down button, then the up button.
Result: The up/down function should not
operate.
FUNCTION TESTS