GE Universal Remote with PC Control HO97685 - Manual (Page 7)

Setting up the Remote
1.Push the tab and lift off the
battery cover.
2.Fit four AAA batteries, taking
care to match the + and -
marks in the compartment.
Battery Saver
Your remote automatically “times-out”
if the keys are pressed for more than
30 seconds. This will save your batter-
ies should your remote get stuck in a
place where the keys remain
depressed (e.g., between the sofa
cushions).
Code Saver (Important)
You have up to 90 seconds to change
the batteries in your remote without
losing codes you have programmed.
However, do not press any buttons until
batteries are installed in the remote. If
buttons are pressed without batteries
in the remote, all codes will be lost.
Setting up the software
NOTE: BOOM™ software lets you con-
trol an MP3 player application from the
remote. It works with WinAmp™,
RealOne™, MusicMatch®, Windows
Media® Player, etc., which you must
previously have installed. It also con-
trols a DVD player, CD player, or TV
tuner on your PC.
1. Download the BOOM software. Point
your web browser (Explorer,
Netscape, etc.) to:
www.jascoproducts.com/boom.html
Click on “Download Boom Software
Now.” Select “Save” to download to
your computer. You will then be
asked where you want to save the
document. Select Desktop, or other
location you will remember and then
click “Save.”
2. Close your web browser, then launch
the installer by double clicking on
“boom” in the location you choose to
save it.
4