Grundig GLCD2208HDV - Manual (Page 38)

- 37 -
does not support the surround sound effect. Use this setting when connecting
the Coaxial Output to a receiver-amplifier not capable of decoding
multi-channel audio.
TONE
Press the
▲,▼,◄ or ►
Buttons
to adjust the Tone setting.
4. Digital Setup
DYNAMIC RANGE
Press the
▲,▼,◄ or ►
Buttons
to adjust the compression ratio
for different audio effect. When
you select Full, the peak signal
value is smallest. When selected
OFF, the peak signal value is the
biggest.
DUAL MONO
Press the
▲,▼,◄ or ►
Buttons
to select the four different audio
output modes; STEREO, MONO
L, MONO R and MIX MONO.