GE A1250 - Manual (Page 76)

72
Select this
setting: Serial number is derived and assigned
to a new file as follows:
Continue
whether the number should continue
on from the last photo you have taken
Reset
reset the counter to 1 and save files in
a new folder in the memory card.
Language
See “ Setting the Language“ section on page 20.
Video system
Use this setting to determine your video system in the
current area.
1. Select the
Video system setting from the Setup
menu as described previously.
2. Use the Up/Down navigation buttons to select
NTSC or PAL. Then press the button to confirm.
The video output signal can be switched to NTSC or
PAL to accommodate different regional standards. The
appropriate setting will vary between regions.
NTSC : USA, Canada, Taiwan, Japan, etc.
PAL : Europe, Asia (excluding Taiwan), Oceania, etc.
Note : The TV output will not display properly if an
incorrect video system is selected.