Gateway Server E-9520T - Manual (Page 43)

Installing and removing drives www.gateway.com
37
7 Secure the diskette drive into the carrier with the two screws (6) included
in the optional diskette drive installation kit.
8 Push the diskette drive assembly into the drive bay until it snaps into place.
9 Connect the data and power cables to the back of the diskette drive.
10 Reinstall the bezel, if required, by snapping it into place on the front of
the chassis.
11 Follow the instructions in “Closing the server case” on page 30 .
12 Reconnect all power cords and peripheral device cables, then turn on the
server.