GarrettCom MAGNUM 6KQE User Manual

Page 3

Advertising
background image

Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09

www GarrettCom com

.

.

Federal Communications Commission

Radio Frequency Interference Statement

This equipment generates uses and can radiate frequency energy and if not

installed and used properly in strict accordance with the manufacturer's instructions, may
cause interference to radio communication. It has been tested and found to comply with the
limits for a Class A computing device in accordance with the specifications in Subpart J of
Part 15 of FCC rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference, in which case the user, at their own expense,
will be required to take whatever measures may be required to correct the interference.

Canadian Emissions Statement

This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.

Cet appareil respecte toutes les exigences du R

églement sur le matériel du

Canada. Cet appareil est Classe A.

Electrical Safety requirements:

1.

This product is to be installed Only in Restricted Access Areas

(Dedicated Equipment Rooms, Electrical Closets, or the like).

2.

48VDC products shall be installed with a readily accessible disconnect

device in the building installation supply circuit to the product.

3.

This product shall be provided with a maximum 10A DC Listed fuse or

circuit breaker in the supply circuit when connected to a 48V

centralized

source.

4.

The external power supply for DC units shall be Listed, Direct Plug In

power unit, marked Class 2, or listed ITE Power Supply, marked LPS,

which has suitably rated output voltage (i.e. 24VDC or 48VDC) and suitable

rated output current.

5.

Product does not contain user replaceable fuses. Any internal fuses can

ONLY be replaced by GarrettCom personnel through the RMA process.

Advertising