Television setup – GPX TD2220 User Manual
Page 9
Customer Support: 1-888-999-4215
GPX
9
Requires a TV antenna (not included).
1. Connect a VHF, UHF, or HDTV antenna to the
RF InPUT on the television.
2. Press the soURCe button to switch to TV
mode.
3. Press the MenU button to access the setup
menu.
4. Press the ARRoW () buttons to
highlight the CHANNEL icon. Press the
enTeR button.
5. Press the ARRoW () buttons to
highlight SIGNAL TYPE. Press the ARRoW
() buttons to select AIR.
6. Press the ARRoW () buttons to
highlight AUTO CHANNEL SEARCH. Press
the enTeR button to begin scanning for
available channels.
Television Setup
Connecting a TV Antenna
Connecting a set-Top box
Requires a cable connection.
1. Connect a cable to the RF InPUT on the
television.
2. Press the soURCe button to switch to TV
mode.
3. Press the MenU button to access the setup
menu.
4. Press the ARRoW () buttons to highlight
the CHANNEL icon. Press the enTeR button.
5. Press the ARRoW () buttons to highlight
SIGNAL TYPE. Press the ARRoW ()
buttons to select AIR.
6. Press the ARRoW () buttons to highlight
AUTO CHANNEL SEARCH. Press the enTeR
button to begin scanning for available
channels.
Connecting basic Cable
Requires a Set-Top Box (not included).
If your set-Top box has an HDMI output:
• Connect the HDMI output on the Set-Top Box to the HDMI InPUT on the television using an
HDMI cable (not included).
If your set-Top box has a Composite Video output:
• Connect the video output on the Set-Top Box to the CoMPosITe VIDeo InPUT on the
television using an A/V RCA cable (not included). Connect the audio output on the Set-Top Box
to the RCA AUDIo InPUT on the television.
If your set-Top box has a Component Video output:
• Connect the component video output on the Set-Top Box to the CoMPonenT VIDeo InPUT
on the television using a component RCA cable (not included). Connect the audio output on the
Set-Top Box to the RCA AUDIo InPUT on the television.
After connecting your set-Top box:
• Press the soURCe button to switch to YPBPR, S-VIDEO, AV, or HDMI to match the connection
used.