Dvd and cd connecting video and audio, Loading a disc, Playing a loaded disc programming a loaded disc – GPX 1311-0721-10 User Manual

Page 2: Playing a jpeg cd, Access the dvd setup menu, Digital output settings, Composite video output (good), Component video output (better), Rca stereo audio output (good), Coaxial digital audio output

Advertising
background image

AUDIO OUT

DIGITAL

Pb/Cb

Y

Pr/Cr

VIDEO

L

R

COAXIAL

120V ~ 60Hz

VIDEO OUT

1. Press the

Open/Close button to open the

Disc Drawer.

2. Load a disc into the DVD player, label side

facing up.

3. Press the

Open/Close button to close the

Disc Drawer.

4. After a disc is loaded, it will begin playing

automatically.

1. Follow the instructions for Loading a Disc

and Playing a Loaded Disc.

2. While the loaded disc is playing, press the

Prog button on the remote.

3. Use the

Arrows/Enter buttons to highlight

and select a DVD title and chapter, or CD
track.

DVD Titles and chapters or CD tracks will
play in the order they are programmed.

4. Repeat step 3 until the desired DVD

titles and chapters or CD tracks are
programmed.

DVD and CD

Connecting Video and Audio

Loading a Disc

1. Follow the instructions for Loading a Disc.

2. If the disc does not begin playing

automatically, press the

Play/Pause

button.

Playing a Loaded Disc

Programming a Loaded Disc

1. Load a JPEG photo disc into the player

by following the instructions for Loading
a Disc.

A slide show of JPEG photos from the CD
will begin playing automatically.

2. Press the

Stop button to access a file

view of the loaded JPEG disc.

3. Use the

Arrows/Enter buttons on the

remote to select and view photos.

Playing a JPEG CD

Press the

Stop button on the remote twice.

In order to access all of the features of the DVD
setup menu, the DVD player needs to be fully
stopped.

Press the

Setup button on the remote.

Access the DVD Setup Menu

SPDIF/OFF: There will be no digital audio
signal output. (Coaxial off)

SPDIF/RAW: The digital audio signal
output will be in its raw format. This mode
is usually used for DTS & Dolby Digital 5.1
signals.

SPDIF/PCM: The digital audio signal
output will be in PCM format. This mode is
usually used for audio CD signals.

Digital Output Settings

Television

Composite Video Input

Note: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
Note: Both video and audio connections must be made from the DVD player to your television.

1. Use the

Composite Video Output to

send video from the DVD player to a
television.

2. Requires an RCA video cable (not

included).

3. Use the RCA video cable to connect the

Composite Video Output to a composite
video input on a television.

4. Adjust the connected televisions input

setting to match the input used in the
previous step.

Composite Video Output (Good)

AUDIO OUT

DIGITAL

Pb/Cb

Y

Pr/Cr

VIDEO

L

R

COAXIAL

120V ~ 60Hz

VIDEO OUT

Television

Component Video Inputs

1. Use the

Component Video Output to

send high quality video from the DVD
player to a television.

2. Requires a component video cable

(included).

3. Use a component video cable to connect

the

Component Video Output to a

component video input on a television.

4. Adjust the connected televisions input

setting to match the input used in the
previous step.

Component Video Output (Better)

AUDIO OUT

DIGITAL

Pb/Cb

Y

Pr/Cr

VIDEO

L

R

COAXIAL

120V ~ 60Hz

VIDEO OUT

Television

RCA Stereo Audio Inputs

1. Use the

RCA Stereo Audio Output to

send audio from the DVD player to a
television.

2. Requires an RCA audio cable (included).

3. Use the RCA audio cable to connect the

RCA Stereo Audio Output to an RCA
stereo audio input on a television.

4. Adjust the connected televisions input

setting to match the input used in the
previous step.

RCA Stereo Audio Output (Good)

AUDIO OUT

DIGITAL

Pb/Cb

Y

Pr/Cr

VIDEO

L

R

COAXIAL

120V ~ 60Hz

VIDEO OUT

Audio System

Coaxial Digital Audio Input

1. Use the

Coaxial Digital Audio Output

to send high quality audio from the DVD
player to an audio system.

2. Requires an RCA audio cable (included).

3. Use the RCA audio cable to connect

the

Coaxial Digital Audio Output to an

coaxial digital audio input on an audio
system.

4. Adjust the connected audio system’s input

setting to match the input used in the
previous step.

5. In the

Digital Out portion of the

setup menu, adjust to PCM, RAW or
OFF.

Coaxial Digital Audio Output

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com

Customer Service: 1-888-999-4215

Email Support: [email protected], Email Parts: [email protected]

Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

To download this User’s Guide in English,
Spanish, or French, or to get answers
to frequently asked questions, visit the
support section at:

www.gpx.com

Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite
la sección de apoyo en

www.gpx.com

Pour télécharger ce guide de l’utilisateur
en anglais, espagnol ou français, ou pour
obtenir des réponses à des questions
fréquemment posées, consultez la rubrique
d’assistance sur

www.gpx.com

International Support

Advertising
This manual is related to the following products: