Go-Video TW1730 - Manual (Page 23)

23
Viewing the Status Information
Press the DISPLAY button on the remote control. The TV will display the input source,
picture mode, sound mode, MTS mode, current time, V-chip, and audio signal you are
listening to.
Adjusting the Volume
● Adjust the volume using the VOL+/– buttons.
Muting the Sound
● Press the MUTE button.
You can conveniently use the MUTE button when a telephone or door bell rings.
To cancel, press the MUTE button again.
Viewing a Video or DVD
● Press the LINE button.
For connection and setup procedures, refer to page 15.
Procedures for Using the TV