GN Netcom GN 8120 USB - Manual

GN 8120 USB – Quick Set Up Guide
Required Components:
Xten ineen Softphone
www.gnnetcom.com
Sound Quality ) Comfort ) Durability
Basic Call Function Integration:
Functions:
The GN 8120 USB contains three call function buttons with associated call function LEDs and a volume rocker for adjusting
the audio volume heard on the headset. The mapping between the three function buttons/LEDs and Xten ineen Softphone is
generally as follows:
1
4
5
1
2
3
4
5
Laptop or PC
Available 1.0 or 2.0 USB Port
Xten ineen version 1.1
GN 8120 USB
Any GN Quick Disconnect Headset
GN 2100 – recommended
GN 2200
GN Profile
GN Advantage Plus
Green button – on-hook/off-hook, answer/hang-up call.
Green button LED – Indication of on-hook/off-hook, incoming call.
White button – Not currently in use – Future.
White button LED –Not currently in use – Future.
Red button – mute on/off.
Multi-Color LED –Indication of mute on/off.
The GN 8120 USB provide in-line control of basic softphone call functions, such as off-hook/on-hook, volume, and mute,
and incorporate digital signal processing to enhance audio quality. No external drivers are required for integration with the
Xten ineen Softphone basic call controls (Plug and Play).
Volume
Rocker Call Function Buttons
Visual LED Alerts
2
3
Installation:
Connect GN QD Headset to GN 8120 USB and Plug GN 8120 USB into any available USB port.
Wait for the device to fully install (Plug and Play).
Go to: http://www.ineen.com.
Download and Install ineen Softphone for Windows or Mac OS X.
Follow set up instructions.
Note: If ineen does not register, your PC is most likely behind a firewall with enhanced security. Contact your IT department to resolve
this issue, or simple install ineen on a PC that has access to an on open broadband connection (for example a home broadband connection).
Right mouse click on ineen Softphone surface and select Tuning Wizard.
Tuning Wizard will appear, click next. Select configure only a headset, click next.
Select GN 8120 within the drop down windows for speaker and microphone, click next.
Adjust the volume, click next. Adjust microphone, click next.
Select internet connection speed, click next then finish.
Restart Softphone and GN 8120 USB will function properly.
Step 1 – Set-up the product
Step 2 – Download the software
Step 3 – Tune the Product
77 Northeastern Blvd. Nashua, NH 03062
1-800-826-4656 www.gnnetcom.com