GE JKP30SPSS User Manual

Jkp30sp, 27" built-in single wall oven, For answers to your monogram

Advertising
background image

For answers to your Monogram,

®

GE Profile

or

GE

®

appliance questions, visit our website at

ge.com or call GE Answer Center

®

service,

800.626.2000.

320445

Specification Created 5/09

JKP30SP

GE

®

27" Built-In Single Wall Oven

Listed by

Underwriters

Laboratories

All GE ranges are equipped with

an Anti-Tip device. The installation

of this device is an important,

required step in the installation

of the range.

KW Rating

240V

3.4

208V

2.6

Breaker Size

240V

20 Amps

208V

20 Amps

Cabinet

27"

A – Cabinet width required

27" min.

B – Minimum cabinet depth

23-5/8"

C – Opening width

25" min. - 25-1/4" max

D – Opening height

27-5/8" min. - 28-1/8" max.

Oven
E – Overall depth*

23-5/8"

F – Overall height with trim

29-7/8" - 30-3/4"

Overall height without trim

29"

G – Overall width

26-5/8"

*Depth including door handle is approximately 26-7/10" min. to

26-8/10" max.

Access

from

adjacent

cabinet

required

CL

Suitable

bracing

to support

runners

18"

Over centerline

of cabinet

(must support 275 lbs.)

2" x 4" or

equivalent

runners

2" x 4"

or equiv.

runners

B MIN.

C MIN.

Conduit 48-1/2" long

32-1/2

D

10

A

Allow 3/4"

for overlap

over all edges

of cutout

Locate

junction box

either 5" MIN.

below cutout

floor or 44"

MIN. above

cutout floor

Minimum

cutout location

from floor

(Minimum 15-5/8"

from floor when

installed below built-in

microwave oven)

E

G

F

20

Note: These ovens are not approved for stackable or

side-by-side installations.
Note:
Cabinets installed adjacent to wall ovens must have

an adhesion spec of at least a 194°F temperature rating.
Note: For 27" built-in single ovens, if marks, blemishes or

the cutout opening is visible above the installed oven, it

may be necessary to add wood shims under the runners

and front trim until the marks or openings are covered.
Note: Door handle protrudes 3" from door face. Cabinets

and drawers on adjacent 45° and 90° walls should be

placed to avoid interference with the handle.
Electric wall ovens are not approved for installation

with a plug and receptacle. They must be hard wired in

accordance with installation instructions.
Installation Information:
Before installing, consult

installation instructions packed with product for current

dimensional data.

Cabinet

27"

A – Cabinet width required

27" min.

B – Minimum cabinet depth

23-5/8"

C – Opening width

25" min. - 25-1/4" max

D – Opening height

27-5/8" min. - 28-1/8" max.

Oven
E – Overall depth*

23-5/8"

F – Overall height with trim

29-7/8" - 30-3/4"

Overall height without trim

29"

G – Overall width

26-5/8"

*Depth including door handle is approximately 26-7/10" min. to

26-8/10" max.

Access

from

adjacent

cabinet

required

CL

Suitable

bracing

to support

runners

18"

Over centerline

of cabinet

(must support 275 lbs.)

2" x 4" or

equivalent

runners

2" x 4"

or equiv.

runners

B MIN.

C MIN.

Conduit 48-1/2" long

32-1/2

D

10

A

Allow 3/4"

for overlap

over all edges

of cutout

Locate

junction box

either 5" MIN.

below cutout

floor or 44"

MIN. above

cutout floor

Minimum

cutout location

from floor

(Minimum 15-5/8"

from floor when

installed below built-in

microwave oven)

E

G

F

20

Dimensions and Installation Information (in inches)

Advertising