GPX BD717 - Manual (Page 6)

GPX 6
oPerations
using the Video output Programming a cd or dVd
Playing a dVd or cd
tuning the am/fm radio
When connecting two products using an RCA
Cable, match the colored ports with the same
colored connection. (Yellow to Yellow)
1. Plug one end of the RCA Video Cable
(included) into the Video Output on the unit.
2. Plug the other end of the RCA Video Cable
(included) into a video input on a television.
3. Set the television to the appropriate video
input.
Video played through the unit will now appear on
the connected television.
1. Load a CD or DVD into the portable DVD
stereo system.
2. Press the Program button on the remote.
3. Use the Number Keypad on the remote to
enter a title and chapter for a DVD or a track
number for a CD.
4. Enter the titles and chapters, or tracks in the
order you want them to play.
5. After the desired titles and chapters, or tracks
are programmed, press the Play button to begin
playing the programmed list.
1. Turn the DVD/OFF/RADIO dial to the DVD
position.
2. Open the DVD/CD door, and insert the DVD
or CD to be played.
3. Press the Play button to begin playing the
loaded disc.
1. Turn the DVD/OFF/RADIO dial to the Radio
position.
2. Turn the AM/FM/FM St. dial to the desired
position.
3. Extend and adjust the FM Antenna to improve
FM radio reception.
An AM Antenna is built into the unit. To
improve AM reception, adjust the position of
the unit.
4. Turn the Tuning dial to adjust the AM or FM
radio station.
5. Turn the Volume dial to adjust the volume of
audio output from the unit.