Grizzly G0493 - Manual (Page 20)

-18-
Model g0493 (Mfg. since 7/10)
this machine was carefully packed when it left
our warehouse. if you discover that it is damaged
after you have signed for delivery, please imme-
diately call Customer Service at (570) 546-9663
for advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Wear safety glasses dur-
ing the entire set up pro-
cess!
this machine presents
serious injury hazards
to untrained users. read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
unpacking setup safety
section 3: setup
the following items are needed to complete the
set up process, but are not included with your
machine:
description Qty
• safety glasses (for each person) ............... 1
• power lifting equipment ............................ 1
• lifting straps (1500 lb capacity) ................. 2
• an assistant ............................................... 1
• straightedge 4' (or longer) .......................... 1
• Main Blade 12" or 14" ................................. 1
• phillips head screwdriver #2 ..................... 1
• hex Wrenches 3, 4, 6, & 8mm ..........1 each
• Wrenches or sockets, 16 & 18mm ....1 each
• dust Collection system .............................. 1
• 5" dust hose (length as needed) ............... 1
• 5" hose Clamp ........................................... 2
• 2½" dust hose (length as needed) ............ 1
• power Cord (length as needed) ................. 1
• power disconnect Box ............................... 1
• electrician ................................................... 1
items needed for
setup
the model g0493 is a
heavy machine that
weighs over 1300 lbs.
serious personal injury
may occur if safe mov-
ing methods are not fol-
lowed. to be safe, you
will need assistance and
power equipment when
moving the shipping
crate and removing the
machine from the crate.