GENNUM DIGITAL WIRELESS HEADSET - Manual (Page 30)

© Gennum Corporation All rights reserved 2005
Page 30
Cleaning your custom earmold
WARNING:
If you have obtained a custom earmold from your hearing healthcare
provider, ask him or her for directions regarding cleaning the earmold. In
general, custom earmolds can be cleaned with mild soap and water. If you
are using water to clean an earmold, you should detach the earmold from
the headset and place the headset in a clean, dry location. Debris can be
brushed or blown out of the tubing and around the canal portion of the
earmold. Be careful not to allow a water drop to clog the tubing blow it
out of the tubing before reattaching the earmold to the headset.
Your headset is virtually maintenance-free. However, it is NOT waterproof.
To remove dust or debris, use a clean cloth or tissue to wipe
dirt/perspiration off the headset.
Dropping, immersing in liquid, or exposing your headset to
extreme temperatures can damage it and can void the warranty.
Headset Maintenance