Graco NVIFONE M20 - Manual (Page 4)

 nüvifone M0 Quick Start Manual
Charge the Battery
Charge the battery for up to four
hours before using for the first time.
If you completely discharge the
battery, recharge it for at least 20
minutes before turning it back on.
1. Insert the plug into the AC power
adapter, if necessary.
2. Plug the USB cable into the AC
adapter.
3. Connect the mini‑USB end of
the USB cable to the mini‑USB
connector on the bottom of your
nüvifone.
4. Plug in the AC adapter into a
power outlet.
You can also charge the nüvifone
using the USB cable and your
computer.
Turn On Your nüvifone
Press and hold the Power key to turn
on and turn off the nüvifone.
Mount the nüvifone in
Your Vehicle
Before mounting the nüvifone, see
page 20 for information about laws
pertaining to windshield mounting.
1. Plug the vehicle power cable into
the power connector on the back
of the cradle.
Cradle
Vehicle
power
cable
2. Snap the cradle onto the suction
cup arm.
3. Remove the clear plastic from the
suction cup. Clean and dry your
windshield and the suction cup
with a lint-free cloth.