Stovax RVF40AVM - Manual (Page 14)

14
MAINTENANCE and SERVICING
5.5 Second remove the Upper Baffle by pulling forward to
disengage it from the hanging points at the top of the
firebox. Rotate the baffle to remove from the firebox
through the door opening..
5.6 The replacement of the system is the reverse of the previous
operations.
5.7 It is important to remove and clean the baffle system to
ensure the flue ways are clear of soot and debris to ensure
the safe and efficient operation of the appliance. The
frequency of cleaning will depend on the appliance
operating conditions.
5.8 The baffle system is designed to give safe and efficient
operation of the appliance. Replace any damaged baffles
immediately.
5.9 Do not modify the baffle system
6.1 As part of the routine maintenance of the Riva stove you
may have to remove the firebricks from the stove. This can
be carried-out without the use of tools, but the bricks must
be removed and replaced, after removing the baffle system.
6.2 Allow the stove to cool fully before removing firebricks.
6.3 Replace the bricks in the reverse order from removal.
6.4 Care should be taken when handling bricks, as they can
become fragile after a period of use. This is normal and the
life will depend on the type of fuels burnt and the level of
use. Damaged bricks should be replaced as soon as
possible, and can be purchased from your Stovax dealer.
PR7100
6. FITTING AND REMOVAL OF FIREBRICKS
PR7100
8
6
2
4
3
1
7
5
PR7099 Lower Baffle