Golden Technologies GA 541 - Manual (Page 13)

Avenger Owner’s Manual Revised 09/29/09
OPERATION
When the power to your Avenger
™ is turned on the TruCharge volt meter/
diagnostics gauge will illuminate. This gauge is used for battery condition and
diagnosing operational problems that may arise. See “Diagnostics” section.
Horn Button
Press this button to sound the horn.
Thumb Lever Control
This self-centering lever system controls your Avenger
™ speed (up to the
maximum speed set by the speed adjustment dial) as well as the forward and
reverse direction. This control system is also called the “Wig-wag”.
To drive forward:
• Please your hands on the handgrips.
• Use your thumbs to operate the control lever.
• Use your right thumb to press lightly on the “F” (forward motion) lever to
move your scooter forward.
• Increase the pressure applied by your thumb to increase your forward
speed.
• To stop your Avenger™, release all pressure on the lever. The lever will
automatically return to the center (neutral) position and your scooter will
come to a gradual stop.
Note: Always bring your Avenger
™ to a full stop before changing direction from
forward to reverse, or from reverse to forward.
To drive in reverse:
• Place your hands on the handgrips.
• Use your thumbs to operate the control levers.
• Use your left thumb to press lightly on the “R” (reverse motion) lever to
move your scooter in reverse.
• Increase the pressure applied by your thumb to increase your reverse
speed.
• To stop your Avenger™, release all pressure on the lever. The lever will
automatically return to the center (neutral) position and your scooter will
come to a gradual stop.