Gianni Industries DG-1000M - Manual

GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-DG-1000M Ver. D Published on 2010.01.28
Features
Statement
Unit: mm
35
.5 70
12
7.
5
1
2
3
4
5
6
7
8
9
0
*
#
DG-1000M
Stand Alone Reader
Mifare High Frequency 13.56MHz
Access mode selectable:
card only ； card or PIN ； card+PIN
Non-Volatile Memory & Invalid PIN lockout
Fully Programmable via keypad and master code
USB connector
Software free of charge
DM-1000M stand-alone Proximity Reader memorizes a set
of 1000 proximity cards. It can communicate with a computer
via a USB cord. DM-1000M enables the built-in beeper to go
off whenever the keypad is pressed. A tamper switch is used to
protect the reader from external damage by linking the relay to
the alarming system. The time of relocking may be adjusted to
avoid tailgating. The reader’s non-volatile memory preserves
the PINs for as long as 10 years. Even when the power fails,
the stored PIN codes will not be washed away.
Conveniently record the list of the user
cards and passwords thru the connection
to the PC with a USB cord.
Specification
1000
95~140mA/12VDC
Input: 1 contact for reqpuest-to -exit button, 1 contact for
tamper switch
Operating Voltage: 12 VDC
° C~+70°C
Ambient Humidity: 5~95% relative humidity non-
condensing
Lockout Function: The controller will be locked for 60
seconds upon entering 5 consecutive invalid master code
or PINs.
LED status indication: 3 LED indicators display
(Red/Yellow/Green)
Net Weight: 180g
Memory Volume: PINs
RF frequency: Mifare 13.56 MHz
Current draw:
Output: 1 relay (dry contacts: N.O./N.C./Com)vandal
resistant alarm (dry contacts: N.O./N.C./COM)
Relay Rating: 10A MAX/12VDC,120VAC
Relay Strike Time: 01~99 seconds or toggle mode (00)
Operating Temperature:-20
User’s information
Configuration setting
All transactions
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original client. The GEM policy
is one of continual development and improvement; therefore
GEM reserves the right to change specifications without
notice.
Warranty
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw