Global Machinery Company GEN2300ES User Manual
Page 20
20
7. Refill the tank with fuel and ensure there are no leaks
between the tap and the tank, and with the fuel tap turned
on, ensure there are no leaks where the fuel hose is fitted
to the outlet of the tap.
Cleaning
1. Keep your machine clean. The outside of the machine
can be cleaned using a damp soft cloth with a mild
detergent if required. Never use water to clean the
generator as it may cause damage to internal parts.
2. Some maintenance products and solvents may damage
the plastic parts; these include products containing
benzene, trichloroethylene, chloride and ammonia.
3. Use a vacuum to clean air inlet and outlet louvres of
the alternator.
4. Take special care to keep the ventilation inlets/outlets free
from obstruction; cleaning with a soft brush followed by
a compressed air jet will usually be sufficient to ensure
acceptable internal cleanliness.
5. Wear eye protection when carrying out cleaning.
Repairs
Only an authorised service centre should repair
the generator.