Golden Technologies LitewayTM - Manual (Page 24)

When assembling the vehicle after transporting
first assemble the transaxle or rear wheel as-
sembly. Place the assembly as shown next to
the frame. The fork has to locate into the pins
as shown.
The pins are marked in red.
Assemble the remaining sections in reverse
order of dismantling. SAFETY NOTICE
Lift the frame over the forks. Line up the pins
and lower the frame. When both sets are locat-
ed push the frame down. You will hear a “click”
as the assembly locks. If the transaxle is not
located correctly the vehicle will not operate.
Assembly of the Transaxle or Rear Wheel Assembly
Fork Pins
24
Golden Liteway GL-100 Owner’s Manual Revised 11/06