Global Machinery Company GTX12100K - Manual (Page 4)

4
Specifications
Safety instructions
WARNING. Read and understand all instructions. Failure
to follow all instructions listed below may result in
electric shock, fire and/or serious injury. The term
“power tool” in all of the warnings below refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Save these instructions
Work area
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of
electric shock.
GTX12100K GTX144100K
443T
183T 243T
Nominal
battery voltage
12V 14.4V 18V 24V
Charger 230–240V ~ 50Hz, 1.2A 230–240V ~ 50Hz, 1.2A 2230–240V ~ 50Hz, 1.2A 230–240V ~ 50Hz, 1.2A
Charging time 3-5 Hours 3-5 Hours 3-5 Hours 3-5 Hours
Drill no load
speed
0–550min -1 0–550min -1 0–550min -1 0–900min -1
Torque settings 21 positions 21 positions 21 positions 21 positions
Drill chuck
capacity
10mm Keyless 10mm Keyless 10mm Keyless 10mm Keyless
Weight 1.9kg 2kg 2.1kg 2.4kg