Graco GPSMAP 62 User Manual
Page 16
12
GPSMAP 62 Series Owner’s Manual
Using the Main Pages
Measuring Distance
You can move the cursor around the
map to measure distance from the
current location.
1. From the map, press
MENu.
2. Select Measure Distance.
The device automatically begins
measuring from your current
location.
3. Move the cursor to a point you
want to measure to.
The distance appears at the bottom
of the page.
4. Press quIT to stop measuring.
Map Setup Options
From the map, press MENu, and
select Setup Map.
• Map Orientation—allows you to
select how the map is displayed
• Guidance Text—allows you to
select when to show guidance text
on the map.
• Advanced Map Setup
◦ Auto Zoom—automatically
selects the appropriate zoom
level for optimal use on your
map. When Off is selected, you
must zoom in or out manually.
◦ Zoom Levels—map items
draw or appear at or below the
selected zoom level.
◦ Text Size—allows you to select
the text size for map items.
◦ Detail—allows you to select the
amount of map data displayed
on the device.
NOTE: Higher detail settings
may cause the map to redraw
slowly.
• Shaded Relief—shows detail relief
on the map (if available) or turns
off shading.