Gefen EXT-TV-MFS - Manual (Page 15)

11
OPERATING THE TV MULTI FORMAT SWITCHER
Selecting the Input Source
• To select an input source, press any one of the front panel buttons. In the
example below, the HDMI1 button has been pressed.
Each button corresponds to a different input on the switcher, as follows:
Button Input Button Input
CV1 Composite In 1 Comp2 Component In 2
CV2 Composite In 2 PC PC / Audio In
SV1 S-Video 1 HDMI1 HDMI In 1
SV2 S-Video 2 HDMI2 HDMI In 2
Comp1 Component In 1 HDMI3 HDMI In 3
• The included IR Remote Control can also be used to select an input source.
Each button on the IR Remote Control corresponds to a button on the front
panel of the switcher. In the example below, Component In 2 has been
selected by pressing the CO2 button on the IR Remote Control.
LED indicates that HDMI In 1
p is the current input source.
LED indicates a
p button was pressed