About the control settings, Drying cycles, Temperature – GE DCL333 User Manual
Page 7: Start, Model nvl333, Model dbl333
IMPORTANT: Clean the lint filter each time you use the dryer.
Automatic cycles automatically determine fabric dryness. Select MORE DRY for heavier fabrics, LESS DRY for lighter
fabrics. Timed cycles run for a selected time.
Drying Cycles
AUTOMATIC COTTONS
For cottons and most linens. For most loads select the Preferred Regular Setting marked with an
∗
or
AUTO COTTONS.
AUTOMATIC PERMANENT For synthetic blends and delicates.
PRESS
TIMED DRY
Set the Cycle Selector at the desired drying time.
TIMED FLUFF
(NO HEAT) For “fluffing” items without heat.
Temperature
REGULAR
For regular to heavy cottons.
MEDIUM
For synthetics, blends, delicates and items labeled permanent press.
FLUFF
For fluffing items without heat. Use the
TIMED DRY cycle.
Start
— Close the dryer door. Turn the START control clockwise to START. Hold for 1-2 seconds and release.
Opening the door during operation will stop the dryer. To restart the dryer, close the door and select START
to complete the cycle.
NOTE:
Drying times will vary according to the type of heat used (Electric, Natural or LP gas), size of load, types
of fabrics, wetness of clothes and condition of exhaust ducts.
About the control settings.
NOTE: Not all features are available on all dryer models.
Customer Service
Troubleshooting T
ips
Operating Instructions
Safety Instructions
1
3
2
START
START
LESS
DRY
COOL
DOWN
70 MIN. TIMED
(NO HEAT)
60
50
40
30
20
10
MORE
DRY
MORE
DRY
AUTO COTTONS
(REG. HEAT)
AUTO PERM. PRESS
(MED. HEAT)
LESS
DRY
OFF
OFF
OFF
Model NVL333
1
3
START
START
LESS DRY
COOL
DOWN
80 MIN
70
60
50
40
30
20
MORE DRY
MORE DRY
AUTOMATIC
PERMANENT
PRESS
AUTOMATIC
COTTONS
TIMED DRY
*
LESS DRY
TEMPERATURE
MEDIUM
REGULAR
FLUFF
Model DBL333
1
3
2
7