Garmin 6000 - Manual (Page 10)

10 GPSMAP 6000/7000 Series Installation Instructions
the Garmin Marine Network Cable:
• The Garmin Marine Network Cable (not included) has a locking ring that secures the cable to the
chartplotter or marine network device. Because of the size of this locking ring, it is not connected to
the network cable at the factory to make it easier to install on your boat.
• After the cable is run to the chartplotter or network device, snap the locking ring together around the
connector and insert the rubber washer as indicated on the instructions packaged with the cable.
Note: The locking ring packaged with a Garmin Marine Network Cable should not be used with
any cable packaged with the GPSMAP 6000/7000 series chartplotter.
Sample Garmin Marine Network Setups:
The following illustrations show common Garmin Marine Network setups. The illustrations only show how the devices connect to each other
using Garmin Marine Network cables. No power connections are shown in any of the diagrams. Ensure that you wire each device to power
according to the appropriate installation instructions.
Garmin GPSMAP
6000/7000 series
chartplotter
Garmin GPSMAP
6000/7000 series
chartplotter
Marine Network with two Chartplotters
Extended Marine Network with two Chartplotters
xx
xxxxxxxxxxxxxxxxxxxxxxxxx
Garmin GPSMAP
6000/7000 series
chartplotter
Garmin GPSMAP
6000/7000 series
chartplotter
Garmin marine radar
GSD 22 sounder
To transducer
GDL 30A XM ® weather receiver