The setup tab - mac address clone – Genius Products U.S.A. BEFW11S4 User Manual

Page 20

Advertising
background image

14

Chapter 5: Configuring the Wireless-B Broadband Router
The Setup Tab - MAC Address Clone

Wireless-B Broadband Router

The Setup Tab - MAC Address Clone

A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will
require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC
address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router
with the MAC Address Clone feature.

MAC Clone Service. To have the MAC Address cloned, select Enable from the drop-down menu, otherwise leave it
on the default Disable.

MAC Address. Enter the MAC Address registered with your ISP here.

Click the Clone button to clone the MAC address.

Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes
to cancel your changes.

Figure 5-10: Setup Tab - MAC Address Clone

Advertising