Global Machinery Company 1050W - Manual (Page 6)

• Before using the tool to make a cut, switch on and let
it run for a while. Watch for vibration or wobbling that
could indicate an improperly installed bit.
• Take notice of the direction of rotation of the bit and
the direction of feed.
• Always switch off and wait until the bit has come to a
complete standstill before removing the work piece from
the machine.
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
Accessories
The GMC powered router table is supplied with the
following accessories as standard:
• 2 x Feather boards • Vacuum adaptor
• Height adjustment tool • Collet spanner
• 1/2” & 1/4” collets • Mitre gauge
We recommend that you purchase all additional
accessories such as router bits from the store where you
bought the tool. Use good quality accessories with a
well-known brand name. Store personnel can help and
advise.
6