Golden Technologies GB116 - Manual (Page 31)

Buzzaround XL Owner’s Manual RevA_092210
VIII. ASSEMBLY
Install the Seat
7. Hold the seat on an angle so you can see the seat swivel post underneath
8. Place the seat swivel post into the seat receiver post as shown in figure 24.
9. Pull up on the seat release lever to lock the seat in place.
Figure 24. Installing the Seat
Pinch Point! Keep hands and clothing clear of the seat swivel post and seat
post.
Accident hazard due to non-engaged seat! Ensure that the seat is properly
engaged by turning the seat slightly left and right.
Unlock the Tiller
10. Turn the tiller lock knob to the unlocked position. See figure 23 on page 29.
IF YOU DON’T UNLOCK YOUR TILLER LOCK KNOB, YOUR TILLER
WILL NOT TURN! THIS COULD CAUSE INJURY.
Accident hazard due to incorrect seat position! Always turn the seat to face forwards
and engage it before driving. If the seat is in any other position, the possibility of tipping is
increased. Before turning the seat, always ensure that the scooter is on an even and solid
surface.
30