Gateway E-4400 - Manual (Page 48)

Adding or replacing memory 41
6 Insert the new RIMM into the socket and align the two notches in the
RIMM with the two notches in the RIMM socket.
7 Gently press the RIMM into the socket until it is firmly seated. Inserting
the RIMM automatically locks each of the socket clamps on each end of
the RIMM.
8 Close the case (see “Closing the case” on page 19.)
9 Reconnect peripherals, the modem cord and the power cord, then turn
on the system.
RIMM