Gateway E-4300 - Manual (Page 70)

64 www.gateway.com
Installing memory
When you upgrade the computer memory, make sure that you install the correct type of
memory module for your computer. Your computer uses DIMM memory.
To install or replace DIMM memory:
1
Open the case by following the instructions in “Opening the case” on page 60 .
2
Find the memory module banks on your system board.
3
If you are removing a DIMM from the memory module bank, gently pull the plastic
tabs away from the sides of the memory module and remove it.
- OR -
If you are adding a DIMM to an empty memory module bank, gently pull the plastic
tabs away from the sides of the memory module bank.