GoVideo DDV9500 - Manual (Page 23)

CHAPTER 4 - COPY FEATURES 21
Audio Insert
You can add taped music or voice-overs to your copies with
Audio Insert. When Audio Insert is on, the audio signal
comes from the Audio In jacks on the front or rear panel.
1
Press
MENU
until the DUAL-DECK FEATURES menu
appears.
2
Press “2” to select COPY TAPE SETTINGS.
3
Press “4” repeatedly to set AUDIO INSERT to:
Off - Audio Insert is disabled.
Line 1 - Audio signal comes from the Audio In jacks on the
front panel. This new audio signal replaces the
tape’s original audio track.
Line 2 - Audio signal comes from the Audio In jacks on the
rear panel. This new audio signal replaces the
tape’s original audio track.
Note: When you are finished using Audio Insert, be sure
to go back and turn this feature off; otherwise your
subsequent copies may not have audio (i.e., if
there is no signal from Line 1 or Line 2).
Audio Insert gives you the
option of adding a new audio
track to your copies