GPX KL858S - Manual (Page 6)

Setting the Clock
1. Plug the unit into a standard 120V outlet.
See “Powering the Unit” on page 2.
2. Before pressing the Standby Button, press
and hold the Mem/Clock Adj. Button for 2
seconds.
3. Use the Tune/Clk Buttons to choose
between 12HR and 24HR. Press the Mem/
Clock Adj. Button to make the selection.
The hour number will blink to indicate that it
is being changed.
4. Use the Tune/Clk Buttons to choose the
current hour. Press the Mem/Clock Adj.
Button to make the selection.
The minute number will blink to indicate that
it is being changed.
5. Use the Tune/Clk Buttons to choose the
current minute. Press the Mem/Clock Adj.
Button to make the selection.
The time will blink several times to indicate
that the time has been set.
6. Press the Display Button to view the time
when in AV Input Mode, Radio Mode, or TV
Mode,
AM
BAND EQ
RADIO DISPLAY
TIMER
TV
VOLUME
CH
TV
SCAN
TV
MODE
CH
BAND EQ
RADIO DISPLAY AA
TIMER
TV
VOLUME
CH
TV
SCAN
TV
MODE
CH
TUNE/CLK MEM/CLOCK ADJ.
AM
6