Graco ISPC001BA - Manual (Page 36)

34
Removing Seat Pad:
Remove both harness strap loops from
Splitter Plate on back of car seat and pull
through front of pad. Open harness tie,
(see pages 20 & 21, fig. f ) release tongues
from buckle.
Unhook “J” hooks from car seat shell.
Pull three 2-button clips out of lower front
edge of car seat shell and inside center of car
seat shell.
Removing Overhead Shield Pad:
Pull both 2-button clips out of shield and
unwrap pad from around shield.
Reverse above steps for replacing seat pad,
overhead shield pad and harness system.
❃
Care & Cleaning
ADDITIONAL INFORMATION
(continued)
1
1
1
2
3
3
2