Graco 308169J - Manual (Page 4)

4 308169
Service
WARNING
Relieve air and fluid pressure
before servicing the regulator, filter or
lubricator.
To reduce the risk of serious bodily inju-
ry, fluid injection, splashing in the eyes
or skin, injury from moving parts, AL-
WAYS open the bleed–type master air
valve (required) to relieve system air
pressure and trigger the gun or dis-
pense valve and open any fluid drain
valves to relieve fluid pressure.
1. Disassemble the component. Refer to the illustra-
tions on pages 4 and 5.
2. Use household soap and water or denatured
alcohol for cleaning. Wipe the parts clean with a
clean, soft, dry rag. Use compressed air to blow
dirt and contaminants out of the lubricator or filter
body.
3. Inspect all parts for wear or damage. Replace
damaged parts. Use all parts supplied with the kit.
NOTE: The chart identifies the available repair kits for the
air filters and lubricators covered in this manual. The cut-
away drawings shown on pages 5 and 6 show the con-
tents of the kits.
Repair Kits
Lubricator Repair Kits
For
Lubricator Kit No. Description
214847
214848
214849 102774 Repair Kit
0940
Lubricator 214847, 214848, 214849, 237212
ADJUSTABLE CAP
VALVE NEEDLE ASSY.
VALVE SEAT
FILLER PLUG
KIT 102774
BOWL
(see chart)