Gateway GM5688E - Manual (Page 53)

www.gateway.com
45
Replacing the memory card
reader
To replace the memory card reader:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 35 .
2 Remove the front bezel by following the instructions in
“Removing the front bezel” on page 35 .
3 Slide the top bezel toward the front of the computer
about 3/4 inch, then remove it from your computer.
4 Remove the two screws that secure the card reader to
the computer.
Tools
You need a Phillips screwdriver to replace the memory card reader.
Important
The color and shape of your replacement card reader’s front cover
may vary from your original card reader.
Screws
8512418.book Page 45 Friday, May 11, 2007 11:44 AM