Grundig CP-731i User Manual
Page 6
ENGLISH-5
B
BE
EF
FO
OR
RE
E U
US
SE
E ((cco
on
nttiin
nu
ueed
d))
ENGLISH
Installing the Batteries
Install the AA batteries into the remote control
transmitter.
1. Remove the battery cover.
Push the knob while lifting up the battery cover.
2. Load the batteries.
Make sure the plus and minus poles are correctly
oriented.
3. Close the battery cover.
1
2
CAUTION
• Use only the specified batteries with this remote control transmitter. Also, do not mix
new and old batteries. This could cause battery cracking or leakage, which could result
in fire or personal injury.
• When loading the batteries, make sure the plus and minus terminals are correctly
oriented as indicated in the remote control transmitter. Incorrect orientation could cause
battery cracking or leakage, which could result in personal injury or pollution of the
surrounding environment.
• When you dispose of the battery, follow the law in your area or country.
• Keep the battery away from children and pets.
• When not using the remote for an extended period, remove the batteries from the remote
control transmitter.
NOTE
: Replace the batteries when remote control transmitter operation becomes difficult.
Attaching the Projector Handle
Attaching the enclosed handle needed.
1. Raise up the handle hook, and pass one end of the
handle through the hole of handle hook.
2. Buckle the end of the handle, per diagram at right.
3. Fix the other end of the handle to the other handle
hook in the same way.
CAUTION
Make sure the handle is firmly attached before carrying the projector with the handle. If
the projector is dropped , it could result in an injury, and continued use could result in fire
or electrical shock.
1
2