Genie SUPER HOIST 82297 - Manual (Page 11)

Part No. 82297 Genie Super Hoist 9
Fourth Edition • Second Printing Operator’s Manual
Operating Instructions
This machine is intended for use as a material lift
only.
When new, the machine may be stiff due to tight
seals and packings. The machine will function
smoother after use. The machine is heavily
lubricated during manufacture to assure long lasting
and smooth performance. Occasionally, excess oil
may leak out of the quick disconnect plug at the
base of the cylinder assembly.
Take precautionary care to avoid
lubricant spills on finished floors.
Setup
Follow the instructions listed in the Function Tests
section.
Platform Raise and Lower
1 Lock all four caster brakes.
2 Raise the platform by pressing the up button on
the hand control.
3 Lower the platform by pressing the down button.
Operating Instructions
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator's
manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation
inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
Fundamentals
The Operating Instructions section provides
instructions for each aspect of machine operation.
It is the operator's responsibility to follow all the
safety rules and instructions in the operator's
manual.
Using the machine for anything other than lifting
material is unsafe.
If more than one operator is expected to use a
machine at different times in the same work shift,
each operator is expected to follow all safety rules
and instructions in the operator's manual. That
means every new operator should perform a pre-
operation inspection, function tests and a workplace
inspection before using the machine.