Grandstream Networks GXP-2000 - Manual (Page 37)

GXP-2000 User Manual
Grandstream Networks, Inc.
- 38 -
Default Ring
Tone There are 4 different ring tone that are defined:
• System Ring Tone: when selected, all calls will ring with
system ring tone.
• Customer Ring Tone 1 to 3 with associate Caller ID: when
selected, if Caller ID is configured, then the device will ONLY
sound this ring tone when the incoming call is from the Caller
ID, device will use System Ring Tone for all other calls.
When selected but no Caller ID is configured, the selected ring
tone will be used for all incoming calls.
Send
Anonymous
If this parameter is set to “Yes”, the “From” header in outgoing
INVITE message will be set to anonymous, essentially blocking the
Caller ID from displaying.
Lock keypad
update If this parameter is set to “Yes”, the configuration update via keypad
is disabled.
5.2.4 Saving the Configuration Changes
Once a change is made, the user should press the “Update” button in the Configuration
Menu. The IP phone will then display the following screen to confirm that the changes
have been saved:
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
Your configuration changes have been saved.
They will take effect on next reboot.
All Rights Reserved Grandstream Networks, Inc. 2004
User is recommended to power cycle the IP phone after seeing the above message.